Monthly Archives: February 2011

Playfield Reassembly on the Bally Kiss Pinball

Finally!  Time to start re-assembling the playfield. Just take a look at this brand new beauty… It is fortunate that there are new playfields available for the Kiss pinball.  While hundreds of pinballs were made in the 1970s only a … Continue reading

Posted in kiss, machines | Leave a comment

Rebuilding the Bally Kiss Pinball Mechanisms

Now we need to start going through each of the major mechanical assemblies. Here, for example, is the drop target assembly.  On the right are the new targets that will be going in.  The assembly must be taken apart, cleaned, … Continue reading

Posted in kiss, machines | Leave a comment

Bally Kiss me, the new parts are here

Ordered up some parts for the game and they have arrived! Some of the parts here are New Pop Bumper Caps, Lane Guides, Hot stamped drop targets, Pop Bumper bodies and skirts, and all new red posts. The green square … Continue reading

Posted in kiss, machines | Leave a comment

Cleaning the bits and pieces

There are lots of cabinet bits and pieces to clean on this Bally Kiss Pinball machine.  For the game to look nice each piece needs to be cleaned and polished. If this was going to be an ultimate restore all … Continue reading

Posted in kiss, machines | Leave a comment

Mean Green Cabinet Clean

Below is a pic of the cabinet before cleaning.   As you can see there is all kinds of crusty stuff on it.  Including nicotine stains, spilled pop, and just some general white crusty stuff. So what we use to clean … Continue reading

Posted in kiss, machines | Leave a comment

WHOA NELLIE!

Today we look at a new pinball machine made in 201o. There is actually only one of these, as it is a prototype made by Dennis Nordman.  Dennis is a famous pinball designer having designed games such as Bally Scared … Continue reading

Posted in General | Leave a comment

Coin Door Detail

Now we get to take the coin door apart and clean all the little bits.  This is a tedious process but is necessary to get all the dirt, grime, and rust off. The little plastic coin entry placards are cleaned … Continue reading

Posted in kiss, machines | Leave a comment